PIC Projects with CCS C Compiler.
This post shows how to configure and use Microchip PIC18F46K42 8-bit microcontroller integrated DMA (Direct Memory Access) module. This example shows how to use the DMA module of the MCU to send screen data buffer to NOKIA 5110 LCD via
Using DMA Controller – Interfacing PIC18F46K42 with NOKIA LCD Read More >>
This PIC MCU project shows how to measure AC voltage up to 500V using PIC18F46K22 8-bit microcontroller. The RMS (effective) value of the voltage under measure is sent to PC which can be printed on any serial monitor software and
AC Voltage Measurement using PIC18F46K22 Microcontroller Read More >>
This tutorial shows how to interface Microchip PIC18F46K22 8-bit microcontroller with ST7789 TFT display. The ST7789 TFT is a color display that uses SPI protocol. This display is an IPS display, it comes in different sizes (1.3″, 1.54″ …) but
PIC18F46K22 Interface with ST7789 TFT – Graphics Test Example Read More >>
This post shows how to interface Microchip PIC18F46K22 8-bit microcontroller with ILI9341 TFT display. The ILI9341 TFT module contains a display controller with the same name: ILI9341. It’s a color display that uses SPI interface protocol and requires 4 or
Interfacing PIC18F46K22 with ILI9341 TFT – Graphics Test Example Read More >>
This PIC MCU project shows how to interface PIC18F46K22 microcontroller with Nokia 5110 (Nokia 3310) graphical LCD screen. In this project I’m going to use CCS C compiler. The name Nokia 5110 (3310) comes from Nokia 5110 (or Nokia 3310)
Interfacing PIC18F46K22 MCU with Nokia 5110 LCD Read More >>
This post shows how to interface PIC18F46K22 microcontroller with SSD1306 OLED (128×64 pixel). The SSD1306 is a monochrome display which means it has only one color (white, blue, yellow …). This display communicates with the master device over I2C mode,
PIC18F46K22 with SSD1306 OLED Display – I2C Mode Example Read More >>
This post shows how to interface PIC18F46K22 microcontroller with SSD1306 OLED (128×64 pixel). The SSD1306 is a monochrome display which means it has only one color (white, blue, yellow …). This display communicates with the master device over I2C mode,
PIC18F46K22 with SSD1306 OLED Display – SPI Mode Example Read More >>
This post shows how to interface Microchip PIC18F46K22 8-bit microcontroller with ST7735 TFT display (128×160 pixel resolution). The ST7735 TFT display is a color display that uses SPI protocol, it’s low cost and easy to use. This module works with
Interfacing PIC18F46K22 MCU with ST7735 TFT – Graphics Test Example Read More >>
This topic shows how to make a simple real time clock using DS3231 and PIC16F877A microcontroller where time and date are displayed on 20×4 LCD screen. The compiler used in this example is CCS C. General Description (from the DS3231
This topic shows how to easily interface the DS1307 real time clock chip with PIC16F877A microcontroller where time and date are displayed on 16×2 LCD screen. The compiler used in this example is CCS C. The DS1307 is an 8-pin