ST7735 SPI TFT Display Library for CCS PIC C compiler The ST7735 SPI TFT library allows the interfacing of this display with any PIC microcontroller more simpler and easier. This library is based on the Adafruit TFT library for Arduino. […]
ST7735 SPI TFT Display Driver for CCS C compiler Read More >>
This topic shows an easy and effective way for decoding IR (Infra-Red) remote controls that use Philips RC-5 communication protocol, but first we’ve to understand how the RC5 protocol works. This Wikipedia links has good infos about the RC5 protocol.
RC-5 IR remote control decoder with PIC12F1822 – CCS C Read More >>
Remote Controlled Real Time Clock/Calendar with PIC12F1822 and DS1307 It is good idea to build a simple and low cost DIY remote controlled real time clock/calendar using simple components. This post show how to make a remote controlled real time
Real Time Clock/Calendar with Remote Control – CCS C Read More >>
In this blog there are several posts talking about bipolar stepper motor and how to drive it. The bipolar stepper motor has two windings and 4 wires and to drive this windings 2 H-bridge circuits are needed. L293D motor driver
Bipolar stepper motor control using PIC12F1822 and L293D – CCS C Read More >>
With the help of L239D we can easily control DC motor speed and direction of rotation. The L293D can control two motors with the same nominal voltage independently and in this project we are going to use half of the
DC Motor control using PIC12F1822 and L293D – CCS C compiler Read More >>
This topic gives a short descriptions about PIC12F1822 microcontroller ADC and PWM module and how to use them using CCS PIC C compiler. For more details go to PIC12F1822 datasheet. PIC12F1822 ADC Module: PIC12F1822 microcontroller has a 10-bit ADC (Analog-to
433MHz RF Remote control system with PIC microcontroller This project shows how to use low cost 433MHz RF transmitter/receiver modules to build a 5-channel wireless RF remote control system using 2 x PIC12F1822 microcontrollers. The used RF modules in this
433MHz Radio Frequency (RF) transmitter and receiver – CCS C Read More >>
5-Channel IR remote control system using PIC microcontroller This topic shows how to make a simple infrared (IR) remote control system using the microcontroller PIC12F1822. This IR system has two circuits as known: IR transmitter circuit and IR receiver circuit.
IR Remote control transmitter and receiver with CCS C compiler Read More >>
NEC IR remote control decoder with PIC12F1822 This topic shows how to decode IR remote control uses extended NEC communication protocol. The complete extended NEC protocol message is started by 9ms burst followed by 4.5ms space which is then followed
Extended NEC Protocol Decoder Using PIC12F1822 – CCS C Read More >>
Interfacing PIC12F1822 with DHT22 (AM2302) humidity and temperature sensor After interfacing the microcontroller PIC12F1822 with DHT11 sensor at: DHT11 Interfacing with PIC12F1822 microcontroller – CCS C Now let’s see how to interface this microcontroller with DHT22 (AM2302) digital relative humidity
PIC12F1822 + LCD + DHT22 (AM2302) Sensor – CCS C compiler Read More >>