PIC16F877A Projects
Below is a list of electronic projects published on Simple Circuit website.
These projects are based on Microchip PIC16F877A 8-bit microcontroller and all of them are provided with circuit schematic diagrams and source codes.
This post shows how to interface Microchip PIC16F877A microcontroller with BME280 barometric pressure, temperature and humidity sensor. Values of temperature, humidity and pressure are displayed on 20×4 LCD screen connected to the microcontroller. In this project the BME280 sensor is used […]
BME280 pressure, temperature and humidity sensor with PIC MCU Read More >>
This post shows how to interface Microchip PIC16F877A microcontroller with BMP280 barometric pressure and temperature sensor. Values of the temperature and the pressure are displayed on 16×2 LCD screen connected to the microcontroller.In this project the BMP280 sensor is used in
Interfacing PIC MCU with BMP280 temperature and pressure sensor Read More >>
This post shows how to control 220V AC lamp brightness using PIC16F877A microcontroller and one TRIAC. The TRIAC is a three terminal component (terminal 1, terminal 2 and gate) that is used to control the current following to the load. The
This topic shows how to build a GPS real time clock using PIC16F877A microcontroller and NEO-6M GPS module, other modules should also work. The microcontroller reads time and date from the GPS module (the GPS module receives data from satellites)
This post shows how to build a real time clock/calendar with temperature monitor using PIC16F877A microcontroller, DS3231 RTCC and SSD1306 OLED display. Time and date are set with two push buttons and they are displayed on the SSD1306 OLED screen
Interfacing PIC16F877A with SSD1306 OLED and DS3231 RTC Read More >>
This topic shows how to connect PIC16F877A microcontroller with SSD1306 OLED display and DS18B20 temperature sensor. The DS18B20 sensor provides 9-bit to 12-bit Celsius temperature measurement resolution (programmable resolution). The default resolution is 12-bit which is used in this project. The
Temperature monitor with PIC16F877A, SSD1306 and DS18B20 sensor Read More >>
This post shows how to build a real time clock using PIC16F877A microcontroller and DS1307 RTC chip where time and date are displayed on an OLED display with SSD1306 controller (128×64 Pixel). With the help of a 3V coin cell
Real time clock with PIC16F877A, SSD1306 OLED and DS1307 Read More >>
This small post shows how to connect PIC16F877A microcontroller with SSD1306 OLED display and DHT22 (AM2302, RHT03) digital humidity and temperature sensor. The measured values of the relative humidity and temperature are displayed on the SSD1306 OLED screen. The SSD1306
PIC16F877A with DHT22 (AM2302) sensor and SSD1306 OLED display Read More >>
This PIC16F877A project shows how build a small weather station for measuring and displaying temperature and relative humidity. The PIC16F877A microcontroller reads the values of the temperature and humidity from DHT11 sensor and display the results on SSD1306 OLED display
This post shows how to interface the PIC16F877A microcontroller with GPS module in order to receive data from satellites where the GPS module used in this project is u-blox NEO-6M (other modules also should work). With the NEO-6M GPS module