PIC Projects with CCS C Compiler.
This post shows how interface PIC18F4550 microcontroller with Nokia 5110 (Nokia 3310) graphical LCD screen. In this project I’m going to use CCS PIC C compiler. The name Nokia 5110 (3310) comes from Nokia 5110 (or Nokia 3310) mobile phone. The […]
This post shows how to interface Microchip PIC16F877A microcontroller with BME280 barometric pressure, temperature and humidity sensor. Values of temperature, humidity and pressure are displayed on 20×4 LCD screen connected to the microcontroller. In this project the BME280 sensor is used
BME280 pressure, temperature and humidity sensor with PIC MCU Read More >>
This post shows how to interface Microchip PIC16F877A microcontroller with BMP280 barometric pressure and temperature sensor. Values of the temperature and the pressure are displayed on 16×2 LCD screen connected to the microcontroller.In this project the BMP280 sensor is used in
Interfacing PIC MCU with BMP280 temperature and pressure sensor Read More >>
This post shows how to interface the PIC16F877A microcontroller with GPS module in order to receive data from satellites where the GPS module used in this project is u-blox NEO-6M (other modules also should work). With the NEO-6M GPS module
This is an example shows how to write texts on SSD1306 OLED display (128×64 pixel) using PIC16F877A microcontroller. In this project the SSD1306 OLED is configured to work in I2C mode. So, make sure that your SSD1306 OLED display is configured to
Interfacing PIC16F877A with SSD1306 OLED display Read More >>
The SSD1306 OLED display contains a driver chip with the same name (SSD1306), it can communicate with the master device (microcontroller, microprocessor …) over I2C protocol, SPI protocol or 8-bit parallel protocol. This topic shows how to use the SSD1306
Interfacing LCD displays with a PIC microcontroller using CCS C compiler needs at least 7 data pins (using the built-in LCD driver). Number of pins needed for the LCD can be reduced to 2 by using an I2C I/O (Input/Output)
The CCS C compiler has a good example of using PIC microcontroller with SD card in FAT file format, this file is located in the examples folder (C:\Program Files\CCS\Examples), its full name is ex_fat.c (fat_ex_shell.c ). This topic shows how
The CCS C compiler is one of the best Microchip PIC® compilers especially when we talk about code optimization. This compiler comes with many drivers and libraries, two of them are MMC/SD card driver (file: mmcsd.c ) and FAT library (file: fat.c ), the FAT
SD Card driver and FAT Library for CCS C compiler Read More >>
This is a simple FAT library (FAT16 and FAT32) for CCS PIC C compiler for reading files from MMC/SD card module. This library works with PIC microcontrollers with limited RAM and ROM like PIC12F1840 MCU. This library works with FAT16