This post shows how to build a weather station using ESP8266 NodeMCU development board (ESP12-E module) and BME280 barometric pressure, temperature & humidity sensor. The NodeMCU reads temperature & humidity & pressure values from the BME280 sensor and prints them […]
NodeMCU weather station with SSD1306 OLED and BME280 sensor Read More >>
This post shows how to interface ESP8266 NodeMCU WiFi development board (ESP12-E module) with BMP280 barometric pressure and temperature sensor. The NodeMCU reads temperature & pressure values from the BMP280 sensor and prints them (respectively in °C and hPa) on
ESP8266 NodeMCU Interface with SSD1306 OLED and BMP280 sensor Read More >>
This post shows how to control a 5V DC motor speed and direction of rotation using ESP8266 NodeMCU development board and L293D motor driver chip. The speed and rotation direction of the DC motor is controlled from a rotary encoder
In the last NodeMCU WiFi development board project, I made an internet weather station where weather data (temperature, humidity, pressure, wind speed and wind degree) are sent serially to the laptop and displayed on SSD1306 OLED screen (128×64 Pixel). In that
NodeMCU Internet clock and weather station | IoT Projects Read More >>
In this IoT project, I’m going to show how to make a simple internet weather station using ESP8266 NodeMCU (ESP-12E) Wi-Fi development board and SSD1306 OLED display (128×64 Pixel). The NodeMCU pulls weather data (temperature, humidity, pressure, wind speed and
NodeMCU Internet weather station with SSD1306 OLED | IoT Projects Read More >>
Last ESP8266 NodeMCU project I made a simple real time clock with DS3231 RTC chip and SSD1306 OLED, time and date were displayed on the SSD1306 screen and they could be set with two push buttons. With the NodeMCU WiFi
NodeMCU Internet clock with SSD1306 display | IoT Projects Read More >>
This NodeMCU project shows how to build a real time clock with this development board, DS3231 RTC chip and SSD1306 OLED display (128×64 Pixel). The DS3231 RTC has a built-in temperature sensor, we could use this sensor to detect and
Real time clock using NodeMCU, DS3231 and SSD1306 OLED Read More >>
This small post shows how to build a simple temperature measurement station using ESP8266 NodeMCU development board and DS18B20 digital temperature sensor where the measured temperature is displayed on SSD1306 OLED screen (128×64 Pixel) and sent serially to Arduino IDE
NodeMCU Interfacing with SSD1306 and DS18B20 temperature sensor Read More >>
Last time I’ve connected ESP8266 NodeMCU development board (ESP-12E) with DHT11 sensor and SSD1306 OLED display. This post shows how to interface the NodeMCU with DHT22 (AM2302) digital humidity/temperature sensor and SSD1306 display (128×64 Pixel). The NodeMCU reads temperature and
Interfacing NodeMCU with DHT22 sensor and SSD1306 OLED Read More >>
This Simple Projects post shows how to interface the ESP8266 NodeMCU development board with DHT11 digital humidity & temperature sensor and SSD1306 OLED display (128×64 Pixel). The NodeMCU reads temperature and relative humidity values from the DHT11 sensor and prints
ESP8266 NodeMCU interfacing with DHT11 sensor and SSD1306 Read More >>