This PIC16F877A project shows how build a small weather station for measuring and displaying temperature and relative humidity. The PIC16F877A microcontroller reads the values of the temperature and humidity from DHT11 sensor and display the results on SSD1306 OLED display […]
This post shows how to interface the PIC16F877A microcontroller with GPS module in order to receive data from satellites where the GPS module used in this project is u-blox NEO-6M (other modules also should work). With the NEO-6M GPS module
This is an example shows how to write texts on SSD1306 OLED display (128×64 pixel) using PIC16F877A microcontroller. In this project the SSD1306 OLED is configured to work in I2C mode. So, make sure that your SSD1306 OLED display is configured to
Interfacing PIC16F877A with SSD1306 OLED display Read More >>
In this blog there are some posts show how to control brushless DC motors (sensored and sensorless BLDC motors) using Arduino (project links are below). This post shows how to control a PC CD-ROM (or DVD-ROM) drive sensorless BLDC motor
Brushless DC motor control with Arduino and L6234 driver Read More >>
This post shows how to build a real time clock/calendar and temperature monitor using PIC18F4550 microcontroller, DS3231 RTCC and SSD1306 OLED display. Time and date are set with two push buttons and they are displayed on the SSD1306 OLED screen.
Interfacing PIC18F4550 with DS3231 RTC and SSD1306 display Read More >>
Let’s continue the SSD1306 OLED display projects and now I’m going to build a simple real time clock with PIC18F4550 microcontroller and DS1307 real time clock chip, time and date are displayed on the SSD1306 display. With the help of
PIC18F4550 Real Time Clock with DS1307 and SSD1306 Display Read More >>
Previously I connected the PIC18F4550 microcontroller with SSD1306 OLED display and I was able to draw some shapes (lines, circles, triangles …) and write texts, next I build a simple relative humidity and temperature measurement station using the same microcontroller
Interfacing PIC18F4550 with DHT22 and SSD1306 display Read More >>
In the last PIC18F4550 project I have successfully connected this microcontroller with SSD1306 OLED display (project link is below), and now I am going to build a relative humidity and temperature measurements station using the PIC18F4550 microcontroller and DHT11 digital
This topic shows how to interface PIC18F4550 microcontroller with SSD1306 OLED display (128×64 pixel). The SSD1306 is a monochrome display which means it has only one color (white, blue, yellow …). Also I will show how the simulation
The SSD1306 OLED display contains a driver chip with the same name (SSD1306), it can communicate with the master device (microcontroller, microprocessor …) over I2C protocol, SPI protocol or 8-bit parallel protocol. This topic shows how to use the SSD1306