This article shows how to build a simple real time clock/calendar using PIC16F887 and DS1307 RTC chip. The DS1307 is an 8-pin integrated circuit uses I2C communication protocol to communicate with master device which is in our case the PIC16F887 […]
DS1307 Interface with PIC16F887 microcontroller – CCS C compiler Read More >>
This is an example showing how to connect LM335 temperature sensing device with PIC16F887 microcontroller. The LM335 is an analog device which requires an ADC module to convert the analog data which is the voltage output from the LM335 into
Interfacing PIC16F887 with LM335 temperature sensor – CCS C compiler Read More >>
This is an example for interfacing the microcontroller PIC16F887 with DHT22 (RHT03 – AM2302) digital relative humidity and temperature sensor with CCS C code and Proteus simulation. Read DHT22 datasheet to understand what I’m going to do because every thing
PIC16F887 Microcontroller with DHT22 digital sensor – CCS C Read More >>
This mini project shows the interfacing of PIC16F887 microcontroller with DHT11 (RHT01) digital humidity and temperature sensor. In this post I’m not going to give any details about the DHT11 sensor because every thing is in the datasheet of the
Interfacing PIC16F887 with DHT11 sensor – CCS C compiler Read More >>
PIC16F887 LCD Example (Hello world!) This post shows a simple example for interfacing PIC16F887 microcontroller with 16×2 and 20×4 LCDs using CCS C compiler. CCS C has a driver which allows us to control LCDs that have HD44780 or compliant
Interfacing PIC16F887 with LCD display – CCS C compiler Read More >>
The microcontroller PIC16F887 has many software and hardware interrupt routines and 3 timer modules which are: Timer0 (8-bit), Timer1 (16-bit) and Timer2 (8-bit). This topic shows how to use: External interrupt Interrupt-on-change pin (IOC) Timer0 and its interrupt Timer1 and
PIC16F887 Timers and Interrupts with CCS C Compiler Read More >>
This simple post shows how to blink an LED using PIC16F887 microcontroller and CCS C compiler. The LED here is connected to pin RA0 as shown in the circuit schematic below and easily that LED can be connected to other
LED Blink with PIC16F887 microcontroller – CCS C Read More >>
This post shows how to make the ST7735 SPI TFT display vertically scrolling using PIC18F4550 microcontroller and CCS PIC C compiler. The CCS C codes below are tested with versions 4.068 and 5.051. For this project we need a driver
ST7735 TFT Vertical Scrolling example with CCS C Compiler Read More >>
This topic shows an other example of interfacing PIC18F4550 microcontroller with 1.8″ ST7735R SPI TFT display. ADC (Analog-to-Digital Converter) module is included in this example with 2 channels and the result is shown in the following video: Related Topic: Interfacing
PIC18F4550 with ST7735 TFT and ADC example – CCS C Read More >>
Interfacing PIC16F877A with DHT11 sensor and ST7735R SPI color TFT display This post shows how to interface PIC16F877A microcontroller with DHT11 relative humidity and temperature sensor and 1.8″ ST7735R SPI TFT display. DHT11 sensor is a digital device used to
PIC16F877A With DHT11 sensor and ST7735 TFT – CCS C Read More >>