This topic shows how to use a IR remote control to control DC motor rotation direction and speed using PIC16F877A microcontroller and L293D motor driver IC. The remote control used in this project is a TV remote control which uses […]
Remote controlled DC motor using PIC16F877A and CCS C Read More >>
DC motor control from remote control This topic shows how to build a simple infra-red remote controlled DC motor using PIC18F4550 microcontroller, L293D motor driver chip and CCS PIC C compiler. This controller control motor speed and rotation direction from
IR remote controlled DC motor with PIC18F4550 and CCS C Read More >>
DC motor interfacing with PIC18F4550 and L293D This topic shows how to control DC motor rotation direction and speed using PIC18F4550 microcontroller and L293D motor driver chip. A pot is used to control motor speed and two pushbuttons are used
DC motor control with PIC18F4550 and L293D – Proteus simulation Read More >>
DC motor interfacing with PIC16F877A and L293D This topic shows how to control DC motor rotation direction and speed using PIC16F877A microcontroller and L293D motor driver IC. A pot is used to control motor speed and two pushbuttons are used
DC motor control with PIC16F877A and L293D – Proteus simulation Read More >>
Low power DC motors can be easily controlled with half H-bridge IC which is the L293D. This IC is 16-pin IC which can control 2 motors in both directions. This topic shows how to control DC motor speed and direction
DC motor control with PIC16F84A and L293D – CCS C Read More >>
PIC18F4550 RC-5 decoder The RC-5 protocol was developed by Philips in the late 1980s as a semi-proprietary consumer IR (infrared) remote control communication protocol for consumer electronics. The RC5 has 14 bits per 1 code transmission, the 14 bits can
RC-5 remote control decoder with PIC18F4550 and CCS C Read More >>
PIC16F84A RC-5 decoder The RC-5 protocol was developed by Philips in the late 1980s as a semi-proprietary consumer IR (infrared) remote control communication protocol for consumer electronics. The RC5 has 14 bits per 1 code transmission, the 14 bits can
RC5 IR remote control decoder with PIC16F84A and CCS C Read More >>
PIC16F877A RC-5 decoder The RC-5 protocol was developed by Philips in the late 1980s as a semi-proprietary consumer IR (infrared) remote control communication protocol for consumer electronics. The RC5 has 14 bits per 1 code transmission, the 14 bits can
RC-5 remote control protocol decoder using PIC16F877A and CCS C Read More >>
DC motor control with PIC18F4550 and H-Bridge The microcontroller PIC18F4550 has two CCP modules CCP1 and CCP2, the CCP1 module is implemented as a standard CCP module with Enhanced PWM capabilities. These include the provision for 2 or 4 output
DC motor speed and direction control with PIC18F4550 and CCS C Read More >>
DC motor control with PIC16F877A and CCS C The microcontroller PIC16F877A has two CCP modules CCP1 and CCP2, these modules could be used to give us two PWM signals. In this topic we are going to see how to use
DC motor speed and direction control with PIC16F877A and H-bridge Read More >>