This post shows how to control DC motor speed and direction of rotation using PIC16F887 microcontroller and L293D motor driver. The L293D quadruple half-H drivers chip allows us to drive 2 motors in both directions. With one PWM signal from […]
DC Motor control with PIC microcontroller | mikroC Projects Read More >>
This project shows how to build a simple real time clock using PIC12F1822 microcontroller and DS3231 RTC chip (or DS1307 RTC) where time and date are displayed on 16×2 LCD. The DS3231 as well as the 16×2 LCD are connected
PIC MCU with I2C LCD and DS3231/DS1307 RTC | mikroC Projects Read More >>
Interfacing LCD display with PIC microcontroller requires at least 6 data pins (for LCD pins: RS, E, D4, D5, D6 and D7). Number of pins needed for the LCD can be reduced to 2 by using an I2C I/O (Input/Output)
Interfacing PIC microcontroller with I2C LCD | mikroC Projects Read More >>
This post shows how to control stepper motor speed and direction of rotation using Arduino UNO board and PS2 joystick. The stepper motor used in this example is 28BYJ-48 (unipolar stepper motor) which usually comes with its driver board. In the last
Stepper Motor Control with Arduino and Joystick Read More >>
In the last Arduino project, I made a simple motor controller which controls the speed and direction of rotation of CD-ROM bipolar stepper motor. Now I’m going to show how to do the same thing with uinpolar stepper motor. The
This small post shows how to control speed and direction of rotation of bipolar stepper motor using Arduino UNO board and L293D motor driver chip. The stepper motor used in this example is just a PC CD-ROM (or DVD-ROM) drive
This MPLAB project shows how to build a simple real time clock using PIC12F1822 microcontroller and DS3231 RTC chip (or DS1307 RTC) where time and date are displayed on 16×2 LCD. The DS3231 as well as the 16×2 LCD are
PIC12F1822 MCU with DS1307/DS3231 and I2C LCD | MPLAB Projects Read More >>
This Arduino project shows how to build a GPS clock with local time adjustment (UTC time + offset) using Arduino UNO board and NEO-6M GPS module. Time and date are displayed on 20×4 LCD screen. In this project the Arduino
Arduino GPS clock with local time using NEO-6M module Read More >>
This project shows how to connect PIC16F887 microcontroller with SSD1306 OLED display (128×64 pixel) and DS18B20 digital temperature sensor. The DS18B20 sensor provides 9-bit to 12-bit Celsius temperature measurement resolution (programmable resolution). The default resolution is 12-bit which is used in
Interface PIC MCU with DS18B20 sensor and SSD1306 | mikroC Projects Read More >>
This simple project shows how to build a real time clock with temperature monitor using PIC16F887 microcontroller, DS3231 RTCC (or DS3232) and SSD1306 OLED display. Time and date are set with two push buttons and they are displayed on the
PIC MCU with SSD1306 OLED and DS3231 RTC | mikroC Projects Read More >>