This small post shows a simulation example of SD card, ST7735R TFT (128×160) and PIC18F4550 microcontroller. The software used in this example is the well known simulation software ‘Proteus’. In this example I’m going to store some image files (BMP […]
SD Card and ST7735R TFT Proteus Simulation with PIC MCU Read More >>
This post shows how to control a sensorless brushless DC (BLDC) motor using PIC16F887 8-bit microcontroller, or let’s say how to build a DIY ESC (Electronic speed controller using PIC16F887). Basically there are two types of brushless motors: sensored and
Brushless DC motor control with PIC16F887 microcontroller Read More >>
Last time I made a simple half-wave controlled rectifier using Arduino and thyristor (SCR), and in this topic shows how did I built a full-wave bridge rectifier using Arduino (half-controlled bridge rectifier). Previous project link is the one below: SCR
This small topic shows how to build a simple single-phase half-wave controlled rectifier using an Arduino board and an SCR (Silicon Controlled Rectifier) or let’s say thyristor. The SCR (thyristor) is a three-terminal device (Anode, Cathode and Gate) with four
SCR control with Arduino – Half-wave controlled rectifier Read More >>
Last time I made a simple Arduino datalogger using SD card and DHT11 relative humidity and temperature sensor. Now I’m going to show how to build an Arduino datalogger that logs: date, time, temperature and humidity on an SD card.
Arduino datalogger with SD card, DS3231 and DHT22 sensor Read More >>
Building a data logger using Arduino and SD card is so easy, this topic shows how to build a simple temperature and humidity data logger with DHT11 sensor. The DHT11 sensor is used to sense the relative humidity and temperature
Arduino data logger using SD card and DHT11 sensor Read More >>
This example shows how to read and write data to and from an SD card. Example will be tested in a real hardware circuit and simulated with Proteus software. Last time I tested the simple example which displays SD card
Arduino and SD card example – Read and write files Read More >>
This topic shows how to get started with Arduino and SD card (microSD cards). It shows how to read information about SD card connected to the Arduino board. The example reports volume type, free space and other information using the
In this tutorial I’m going to control a DC motor speed and direction of rotation using Arduino uno board, rotary encoder and L293D motor driver chip. I used the rotary encoder shown below: The rotary encoder has 5 pins: GND,
DC Motor control with rotary encoder and Arduino Read More >>
This post shows how to control a DC motor speed and direction of rotation using Arduino uno, joystick and L293D motor driver. The joystick (PS2 Joystick) consists of two potentiometers (one for the X-axis and the other for the Y-axis)
Arduino DC motor control with joystick and L293D Read More >>